Facebook Follow us on Twitter
Flush Door ( IS 2202 )

 

'Gattani Ply' flush door is a durable product for its excellent quality, exceptional finish and unique dimensional stability. It is made of selected hardwood frames and accurate battens. It is evenly constructed with same species of timber that matters the most in providing longer life. stiles, rails and wooden stripes are kiln-seasoned and are treated with eco-friendly preservatives. BWP grade of Phenol Formaldehyde resin is used for bonding the layers. The phenolic resin conforms to IS 848:1974 specifications, which is mixed with unique additives to enhance the protection characteristics. 'Gattani Ply' Flush doors have extra lock rail that provides sufficient strength to the handles and knobs. Its hardwood frames provide high and anti deviation resistance. The complete testing of Flush doors enables the company to render assured strength, safety and peace. All 'Gattani Ply' Flush doors are shop floor tested and conforms to IS 2202:1999 specification.

 

Standard Sizes: Modular and Non-modular sizes, single leaf as per customer requirements.

 

Standard Thickness: All standard thickness available.

 

TECHNICAL SPECIFICATIONS

Test Prescribed in IS:303-1993
Min. Value For Conformity
Observed Value
  • Dimensional & Squareness test as per IS:4020 (Part-2), 1998
Height & Width shall be measured within accuracy of 1.0mm.
Within specified limit
  • General flatness test as per IS:4020 (Part-3), 1998

Squareness shall be measured to an accuracy of 0,1 mm.

Within specified limit
  • Local planeness test as per IS:4020 (Part-4), 1998
Planeness will be measured to an accuracy of 0.1mm
Within specified limit
  • Impact Indentation Test as per IS:4020 (Part-5), 1998
Indentaion will be measured to an accuracy of 0.1mm
Within specified limit
  • Flexure Test as per IS:4020 (Part-6), 1998
The Deflection shal be measured to an accuracy of 0.1mm
Within specified limit
  • Edge loading test as per IS:4020 (Part-8), 1998
The Deflection shal be measured to an accuracy of 0.1mm
Within specified limit
  • Shock resistance test as per IS:4020 (Part-5), 1998
4 to 5 shocks per minute
Within specified limit
  • Buckling test as per IS:4020 (Part-9), 1998
Deformation is measured to an accuracy of 1mm, 5 min. after application of the load and 15 min. after unloading.
Within specified limit
  • Slamming test as per IS:4020 (Part-10), 1998
50 tmes on the nail at the rate of 4-5 drops/min.
Found OK
  • Misuse test as per IS:4020 (Part-11), 1998
It should pass after applying 200 N force to the handle at right angle to the plane of the frame.
Satisfactory
  • Varying humidity test as per IS:4020 (Part-12), 1998
Deviation shall be measured to an accuracy of 1.0mm.
Within specified limit
  • End immersion test as per IS:4020 (Part-13), 1998
There shall be no de-lamination.
No de-lamination found
  • Knife test as per IS:4020 (Part-14), 1998
Minimum pass standard
Excellent
  • Glue adhesion test as per IS:4020 (Part-15), 1998
There shall be no de-lamination.
No de-lamination found
  • Screw withdraw test as per IS:4020 (Part-16), 1998
Applied load shall be 2.0mm per min. for complete withdrawal of the screw within specified limit.
With specified limit

 

Application: * Solid core Dlush Door is used for door shutters in homes & offices.